VAL Avionics NAV 2000 User's Guide Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 224
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
SV-D700, SV-D1000 and SV-D1000T Operation
SkyView Pilot’s User Guide - Revision Q 3-7
How to Reboot the Display
Press and hold buttons 1, 2 and 5 simultaneously to instantly reboot the system. This may be
helpful if you need to cycle power after changing certain settings and for general
troubleshooting.
How to Manually Adjust the Backlight Brightness or Dim Level
Press SCREEN on the Main Menu and then press DIM (this is the Dim Menu). To decrease or
increase the backlight brightness press DEC- or INC+, respectively. To set the backlight
brightness to 100%, press FULL. Press BACK twice to exit the Dim Menu and return to the Main
Menu.
If the display is set to automatic or external backlight brightness control, this operation will
toggle the backlight brightness control to manual mode. You can determine if there was a
change in control mode by the label over button 7 in the Dim Menu. If the display was set to
manual mode in the Setup Menu, there will be no label. If the display was set to automatic or
external, the label will toggle between MANUAL and AUTO or MANUAL and EXTERNAL,
respectively.
Reference the SkyView System Installation Guide for instructions on specifying the display’s
backlight brightness control method.
How to Enter the Joystick Function Menu
These menus are used to specify which bug or parameter that joystick adjusts if turned. For
example, joystick 1 could be set to adjust the heading bug and joystick 2 could be set to adjust
the altitude bug.
Figure 5 illustrates the joystick menu when all possible bugs and functions are enabled. The
joystick menu on your display may contain fewer items than seen here:
Figure 5Joystick Menu
To set the function of a joystick:
1. Click a joystick or move it in any direction to enter its Joystick Function Menu.
2. Choose the joystick function by moving the joystick up or down.
3. Confirm the highlighted function by clicking the joystick or moving it left or right.
Page view 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 223 224

Comments to this Manuals

No comments